3 Ways To Fix KitchenAid Dishwasher Squeaky Door

kitchenaid dishwasher squeaky door
  • Save
kitchenaid dishwasher squeaky door

Cooking food by yourself can be quite joying. You can alter recipes by adding in or removing ingredients you don’t like. Although, when it comes to cleaning the dishes. This can be quite annoying. Considering this, companies like KitchenAid provide their users with dishwashers that can be used instead. These will clean your dishes for you making the job a lot easier.

Another benefit of going for these devices is how much water they can save. Usually, you have to leave your tap running while rinsing the dishes. On the other hand, a dishwasher will only use a limited amount of water that is required for the job.

While these are amazing to use, there are also some issues that you can run into. We will be using this article to provide you with a few steps that can be used to fix a squeaky door on your KitchenAid dishwasher.

KitchenAid Dishwasher Squeaky Door

  1. Lubricate the System

The dishwashers from KitchenAid are equipped with a pulley system that contains nylon wiring running across them. This is used to open and close the door with a smooth motion. However, you should note that the equipment requires you to keep it lubricated.

If you have not been doing this then it can be hard for the doors to function properly. Considering this, the lack of lubrication might be causing your doors to squeak whenever you open them. You can try opening up the door completely and then lubricating the nylon wire and the pulley mechanism.

Now leave the system like this for a few minutes and then try opening and closing the door several times. This will allow the wire and system to get lubricated completely fixing the noise you were getting previously.

  1. Replace the Pulley and Nylon Wire

If the squeaking sound had been coming for a while now then there is a chance that the pulley system within your dishwasher has gotten damaged. If this happens, then the user will have to replace both the wires and pulleys with new ones.

Although, you can try testing these parts by opening the door again and again. Notice which parts exactly are making the sound and then take the equipment apart. You can then try cleaning them up and removing anything that is stuck in them. Now lubricate them again and see if your issue is gone. If it is not then you will have to replace the parts giving you trouble.

  1. Replace Pulley Kit

The steps mentioned above will fix the squeaky door problem you are getting on your KitchenAid dishwasher. Although, instead of replacing the pulley mechanism with a new one. The user can install a different kit in their dishwashers instead.

There are tons of door balancing kits available online that can be used. However, you have to check their dimensions and then confirm if these can be installed on the model of dishwasher you are using. The process to install them is quite simple and you should not have much trouble with it. Just follow the manual provided to guide you throughout the setup.

  • Save
Share via
Copy link
Powered by Social Snap