Kitchen work is stressful unless you have certain gadgets that save you time on doing minor tasks. These gadgets are mostly inexpensive and make your cooking far easier. Misto sprayer is one such device.
When preparing skillets or dough, you can use it to coat them. With the help of the Misto sprayer, you will not use excess oil, as the oil droplets will control the amount of oil you spray. In addition to spray oil, you can use the sprayer to dress salads and bread.
However, the sprayer is susceptible to clogging and unexpected pump failure. Some users have reported that the Misto sprayer stops pumping sometimes.
With that in mind, this article will cover the possible ways that will help you fix the pumping issue. Let’s get straight into it!
Misto Sprayer Won’t Pump: How To Fix?
1. Inadequate Pressure
To start with, identify the source of the Misto sprayer’s pumping issue. Mostly, the vessel is either not pressurizing or it is not spraying. To verify this, you must conduct a quick test. If you are handy, you can perform this test on your own.
Start by adding any liquid to the oil mister. The mister’s ring should be tightened, and then place the cap on it. Pump it ten times. If you hear hissing at this moment, that means there isn’t enough pressure to spray.
To fix the problem, pump the sprayer 30 times. The pump should begin hissing at this point, signaling that it is pressured. It also indicates that the vessel contained some air. In this case, the top of the mister and ring should be removed.
Repeat the entire process. Point the nozzle to a bowl after removing the ring. To test whether the button is functional, push it.
If it still won’t pump, something else is impeding the mister’s pumping process. For that, the Misto sprayer needs to be cleaned to get it back to work!
2. Clean The Sprayer
Most of the time, the oil used in the sprayer causes it to become blocked, and when it does, the sprayer fails to pump.
The company Misto recommends cleaning the Misto sprayer every two months. To clean it correctly, go by the instructions in the user manual that came with the sprayer.
Luckily, cleaning the sprayer is a fairly straightforward process, and you can do it at home. Start by filling the sprayer with soap and hot water. After that, spray a little mixture after ten pumps. Allow the detergent and water to sit there for a few hours.
After that, use the sprayer with clean water. At this stage, we can assume that the Misto sprayer must have started pumping again.
If not, there is a high likelihood that the sprayer is faulty, and you’ll have to purchase a new one. But before that, it is suggested to contact customer service to claim a warranty.
3. Contact The Customer Service
Misto sprayers are well-known in the industry thanks to their excellent performance. However, they can also develop a few issues.
They may not be able to build the right pressure, or there might also be blockages at times. All of these factors might contribute to a faulty pumping system.
If nothing fixes the problem, make a call to customer service and describe the entire situation. Misto sprayers are backed by a warranty from the manufacturer.
Therefore, check to see if your unit is still under warranty or not. If it is, you can get a repair or replacement for free.
The Bottom Line
Misto sprayers are a go-to choice for many people. However, just like any other equipment, they can also show a few problems. There have been many complaints regarding the pumping problem in these sprayers.
This article has covered the ways to fix this issue. To keep your Misto sprayer in good working condition, consider cleaning it now and then.