Pressure Cookers are a necessity for every kitchen as they make cooking a whole lot easier for you. You will be able to cook lots of dishes that would take time otherwise in relatively lesser periods with the help of a pressure cooker.
TaoTronics is one such brand that is known for its exceptional quality of pressure cookers and you will enjoy using them in your kitchen no matter for residential or commercial use. A few common problems that you might have to face and their solutions are:
TaoTronics Pressure Cooker Problems
1) Temperature Malfunction
The most commonly faced issue on the TaoTronics pressure cooker is the temperature malfunction on it. These Pressure Cookers have a digital screen and touch control panel on it that allows you to set the timer and the temperature. However, at times it can stop working and will not react to the command that you are trying to enter on it. This is not a big deal and should be fixed up in no time at all.
To fix this problem, you will have to reset the pressure cooker but worry not as there is not much legwork you will have to do. Simply take the plug off electric socket for at least 5 minutes and then plug it back in. This is going to effectively reset the pressure cooker and you will be able to make it work again without having any issues or problems like this.
2) Keeps Turning Off
Another problem that peoples face is that their electric pressure cooker from the TaoTronics keeps turning itself off every once in a while. This is caused due to the failsafe protocol and if the pressure cooker builds up excessive pressure and it reaches to the failsafe pressure rating; the pressure cooker will turn itself off as a safety measure that is pre-programmed by the manufacturer on such pressure cookers.
If you are facing any such problem and looking for an effective solution for it, you should simply use the release valve in order to release all the pressure that is inside the pressure cooker. After that, carefully take the lid off and then start the pressure cooker again. The problem will most likely be gone after this. However, if the issue persists and you are unable to get rid of it, you should get your pressure cooker checked as there might be something wrong with the failsafe pressure sensor, it might be actually building more pressure and you will have to get that fixed.
3) Not building the right pressure
All the cooking in these electrical pressure cookers is done by pressure and if the pressure cooker is not building enough pressure, it might take longer for you to cook the food and taste will be affected as well.
If you feel like your pressure cooker is not building the right pressure, it might be leaking at some point, and you should plug it out and release all the pressure. After that, you will need to check for the rubber seals and replace them and that will help you get rid of the problem.